【Price Reduction】Marui Hi-Capa 4.3 Compensator

This is a compensator compatible with the Marui Hi-Capa 4.3 series.
It has a very tactical design.

The rail slots on the bottom enhance its imposing appearance and versatility for accessory attachment.
It also functions as a strike face, allowing the hammer to drop even when the muzzle is pressed against a surface.

To install, slide it onto the Hi-Capa body's rail from the front and tighten the bottom grub screw.
(Please be careful not to overtighten.)
This is a new version designed with separate parts to prevent damage to the main body.

Compatibility with barrels featuring silencer threads has not been confirmed, but it may attach if the part extending from the slide is narrowed by threading and the thread cover is removed.
(Slight marks may remain on the bottom of the frame.)

■Important Notes
The compensator and grub screw (pre-installed) are the items for sale.
Please note that the gun, custom magazine bumpers, and other accessories are not included.
When installing, be sure to leave a gap of approximately 0.4mm so that the slide does not interfere.
The design is subject to change for improvement.
This is a personally produced item made with a 3D printer. As such, there may be some roughness or minor scratches as shown in the photos. Those who are sensitive to such details or concerned about the condition should refrain from purchasing.

The material is carbon fiber PLA.
While it has a certain degree of strength, it differs from commercially produced products and is weak to heat above 60°C. Please be especially careful in hot environments such as inside a car on a hot summer day.
A 2-week warranty against breakage is included.
Please inquire about discounts for bulk purchases.

#Other Original Custom Parts Here

Resale purchases and unauthorized use of images are strictly prohibited.