430 Men's Black Mon-tsuki Habutae Haori

This is a black habutae haori (a type of Japanese jacket) with the five crests of Maruni Mogi (a family crest).

The origin is unknown, but it is likely habutae woven in Fukui Prefecture.

While I am also listing habutae kimonos and haori from Gosen, compared to those habutae, this fabric feels slightly thinner. However, this makes it very soft to the touch, bringing out the characteristic qualities of habutae.

It is a plain weave fabric where the warp and weft threads interlace.

While standard plain weave uses one warp thread of the same thickness as the weft thread, habutae uses two thin warp threads, resulting in a soft, light, and lustrous fabric.

The lining (shoulder lining) is made of white habutae.

Photos 11 and 12 show the habutae of the shoulder lining, and photos 17 and 18 show enlarged views of the warp and weft structure of the outer fabric. The points where the two warp threads meet are difficult to see.
(These were taken with a USB microscope.)

The name habutae is said to come from the fact that two warp threads are passed through each heddle of the loom.

Both the outer fabric and lining are made of pure silk habutae.

Dimensions (in cm):
Haori length (back): 99
Sleeve length (from center back to cuff): 64.5
Sleeve width: 32.5
Sleeve length (vertical): 51
Back width: 30.5
Front width: 18

There is a stain on the right front panel. (Photos 1, 2, 13, 14)
There is a stain on the right back sleeve. (Photos 11-13)

There is darkening on the back crest. (Photos 11, 13, 15)
There are stains on the front and back of the left sleeve on the lining. (Photos 5, 6 and 7, 8)

We have checked for stains and dirt as thoroughly as possible, but there may be some oversights. We appreciate your understanding.

These are images taken with a digital camera. Please note that colors may appear differently depending on your monitor.

The white, four-fold, pom-pom style haori himo (cord) used for the photoshoot (synthetic fiber) will be included. The haori himo has a synthetic tassel (polyester tassel) and a round silver ring.
(Photos 1, 3, 4)

This is a temporary fix to keep the tassel from getting messy. If the metal fitting is visible, it detracts from the formality of the garment.
It is said that visible metal fittings should be avoided, especially in formal settings. The above is quoted from an AI copilot explanation.

Some online stores state: A tassel ring is attached to maintain the shape of the tassel. Please use it without removing the ring.
Please use the four-fold knot without untying it.